This machine was purchased in May, 2016. So far, our factory mainly orders for conventional small door banners, and the order volume of wide banner is relatively small, so it is transferred. This heat sublimation flag machine was purchased at 150000. Its stability and printing clarity are not much worse than those of imported heat sublimation flag machines. It uses imported Epson nozzles; There are two modes of double nozzle operation and single nozzle operation. The double nozzle operation can print 26 square meters per hour, and the single nozzle operation can print 13 square meters per hour.
This thermal sublimation flag direct injection machine can print pictures with a maximum width of 2.4 doors, and can produce large format face advertising products such as the picture of the bramble display frame, No. 1 non splicing flag, fast display picture, etc.
Now this thermal sublimation flag direct injection machine only needs 45000 to be pulled away. Now if you come to take it, there is a good nozzle on the machine, and you can directly produce it by pulling it. If the nozzle is not used for a long time, it is easy to break down. If you want to enter the direct injection flag machine, you should start immediately. Buy the machine and send the nozzle. Where can you find it.